logo
Skip Navigation LinksGovernment Solutions > Industry > Land > Vehicle Protection > Military Specification Primers  

Military Specification Primers

MIL-DTL-53022 Type I

MIL-DTL-53022 Type I Epoxy Primer is a two component, Epoxy Polyamide, corrosion inhibiting primer, suited for high performance application, it is lead and chrome free, and outperforms zinc chromate primer.

Key Features and Benefits

  • Two component primer
  • 4.4 lbs./gal. (528 g./l.) VOC mixed
  • No induction time required
  • Excellent corrosion resistance
  • Excellent solvent and chemical resistance
  • Free of lead and chromate hazards
  • May be force dried
  • Training Available
  • Expert Technical Service Support

PPG Product Code

Color Name

Color Number

MLN1088A White N/A
MLN1088T Buff N/A
MLN1088B Catalyst N/A
MLNT236 Thinner N/A

MSDS

Product Data Sheet 

MIL-DTL-53022 Type II

MIL-DTL-53022 Type II Epoxy Primer is a two component, Epoxy Polyamide, corrosion inhibiting primer, suited for high performance applications and is lead and chrome free. Outperforms zinc chromate primer.

Key Features and Benefits

  • Two component primer
  • 3.5 lbs./gal. (420 g./l.) VOC mixed
  • No induction time required
  • Excellent corrosion resistance
  • Excellent solvent and chemical resistance
  • Free of lead and chromate hazards
  • May be force dried
  • Training Available
  • Expert Technical Service Support

PPG Product Code

Color Name

Color Number

MLN1981A White N/A
MLN1981T Buff N/A
MLN1981B Catalyst N/A
MLNT236 Thinner N/A

MSDS

Product Data Sheet 

MIL-DTL-53030

MLN8460A/MLN8460B a two component water reducible epoxy primer for use over pretreated zinc phosphated steel. It is approved to the military specification MIL-DTL-53030.

Key Features and Benefits

  • Two component primer
  • Less than 2.8 lbs./gal. (340 g./l.) VOC
  • HAP Free
  • Excellent corrosion resistance
  • Excellent solvent and chemical resistance
  • Free of lead and chromate hazards
  • May be force dried
  • Very compatible with MIL-DTL-64159 CARC coatings

PPG Product Code

Color Name

Color Number

MLN8460A N/A N/A
MLN8460B Catalyst N/A

MSDS

Product Data Sheet


DOD-P-15328

MLNB875/MLNT63/MLNT98 is a pretreatment wash primer for use on clean metal surfaces of all types as a treatment prior to application of the coating system. Not intended to be used as a permanent protective coating by itself. This wash primer has excellent spray characteristics and meets TT-C-490E Type III and MIL-P-15328D wash primer specifications.

Key Features and Benefits

  • Substrate pretreatment
  • Fast drying
  • Excellent spray characteristics
  • Improves adhesion

PPG Product Code

Color Name

Color Number

MLNB875 Green N/A
MLNT63 Catalyst N/A
MLNT98 Reducer N/A

MSDS

Product Data Sheet


MIL-PRF-26915

MLN5751M2 is a one component moisture cure zinc rich primer that provides outstanding corrosion protection for military ground and tactical equipment and munitions.

Key Features and Benefits

  • Single Component
  • Ready to spray
  • 2.8 lb./gal. (336g./l.) VOC
  • Outstanding corrosion resistance
  • ≥1000 hours salt spray when used in conjunction with MIL-DTL-53022 and CARC topcoat
  • 160 cycle GM 9540P cycle B when used in conjunction with MIL-DTL-53022 and CARC topcoat
  • No hard settle (can be mixed on a shaker)
  • No tip plugging
  • Training Available
  • Expert Technical Service Support

MSDS 

Product Data Sheet 

MIL-PRF-32348 Type I

PPG's Epoxy Powder Primer is a great solution for corrosion resistant applications with CARC camouflage finish coats on all military tactical equipment.  This MIL-PRF-32348 Type I approved powder primer is an alternative to military specification liquid epoxy primers (MIL-DTL-53022, MIL-DTL-53030). 

Key Features and Benefits

  • Listed on Army Research Labs Qualified Product List (QPL)
  • Near Zero VOC 
  • Excellent performance as a military and industrial use primer
  • Excellent corrosion resistance
  • Excellent solvent and chemical resistance

PPG Product Code

Color Name

Color Number

MLP80000 Off White 26622

MSDS 

Product Data Sheet 

MIL-PRF-32348, Type I, Class I, MLP80000, Gray #26622

Qualified Products Database (QPD) Letter