PPG Aerospace advanced-performance coatings improve durability of F-16 jets


HILL AIR FORCE BASE, Utah, April 8, 2008 – F-16 jets flown by the U.S. Air Force Thunderbirds are being painted with a smooth, fast-drying primer and high-gloss, lightweight, advanced-performance coating (APC) topcoat by PPG Industries’ (NYSE:PPG) aerospace business.

Desoprime HS CA7233 epoxy primer and Desothane HS CA9800 polyurethane APC topcoat by PPG Aerospace – PRC-DeSoto will improve durability of the familiar red, white and blue colors of the jets flown by the air demonstration squadron, according to Duane Utter, PPG global segment manager, military coatings and classified products.

Utter said the smooth application properties of Desoprime HS CA7233 primer leave the surface ready for the topcoat without sanding or other preparatory work. “The combination of Desoprime HS CA7233 primer and Desothane HS CA9800 APC topcoat gives a long-lasting, high-quality gloss finish with exceptional image definition,” he said. “This Desothane APC topcoat has superior weathering resistance and cleanability that retain gloss and color far longer than previous coatings systems, extending the time before repainting is needed.”

Both products offer application benefits, Utter said. “The Desoprime primer dries faster than traditional high-solids primers to enable faster repainting, while the Desothane APC topcoat can be tailored at the factory to dry in as few as two hours or as many as 15 hours to meet application requirements.”

Compared with an earlier version of gloss topcoat, Desothane HS CA9800 APC topcoat achieves up to a 5-percent weight savings because of its lower density. “This is significant because the weight reduction enhances fuel efficiency so aircraft can fly farther between refuelings,” Utter said.

Both PRC-DeSoto high-solids, low-VOC (volatile organic compound) APC topcoat and primer are qualified by the U.S. Navy for military application. Desothane HS CA9800 APC topcoat meets requirements of MIL-PRF-85285D, and Desoprime HS CA7233 primer is qualified to MIL-PRF-23377J.

Supplying coatings for the U.S. Air Force jets involves cooperation between PPG’s Seattle Application Support Center (ASC), which mixes and packages the coatings for delivery to Hill Air Force Base in Ogden, Utah, where the jets are painted, and its Phoenix aerospace products sales office, which supplies coatings to Nellis Air Force Base, Nev., near Las Vegas, where the Thunderbirds are based.

“The PPG aerospace teams at our Seattle ASC and in Phoenix are doing a great job coordinating the effort to make sure the Air Force has the service and support it needs,” Utter said.

By fall, PPG coatings are to be applied to 11 Block-52 F-16 jets being delivered to the Thunderbirds at Nellis Air Force Base. The air squadron team is transitioning to the newer, faster version of the F-16 in 2008, and the first all-Block-52 F-16 demonstration will take place in 2009.

The U.S. Air Force also uses the Desothane APC topcoat at Hill Air Force Base to repaint F-16s and C-130 military transport aircraft used in combat.

PPG’s Sierracin/Sylmar Corp. subsidiary makes canopy transparencies for F-16s flown by the U.S. Air Force and 20 other countries.

PPG Aerospace is the aerospace products and services business of PPG Industries. PPG Aerospace – PRC-DeSoto is the leading global producer of aerospace sealants, coatings, and packaging and application systems. PPG Aerospace – Transparencies is the world’s largest supplier of aircraft windshields, windows and canopies, manufactured at Huntsville, Ala., and by subsidiaries in Sylmar, Calif., and Casaletto Vaprio, Italy.

About the U.S. Air Force Thunderbirds
The U.S. Air Force Air Demonstration Squadron plans and presents precision aerial maneuvers to exhibit the capabilities of modern high-performance aircraft and the high degree of professional skill required to operate those aircraft. The squadron is an Air Combat Command unit composed of eight pilots (including six demonstration pilots), four support officers, four civilians and approximately 120 airmen performing in more than 31 career specialties. The F-16 Fighting Falcons flown by the Thunderbirds are serviced by the Ogden Air Logistics Center at Hill Air Force Base. A Thunderbirds demonstration is a mix of six aircraft performing formation flying and solo routines. The four-aircraft diamond formation demonstrates the training and precision of Air Force pilots, while the solos highlight the maximum capabilities of the Lockheed Martin F-16C. For more information about the Thunderbirds, visit thunderbirds.airforce.com.

About PPG
Pittsburgh-based PPG is a global supplier of paints, coatings, chemicals, optical products, specialty materials, glass and fiber glass. The company has more than 150 manufacturing facilities and equity affiliates and operates in more than 60 countries. PPG’s sales in 2007 were $11.2 billion. SigmaKalon, a worldwide coatings producer based in Uithoorn, Netherlands, that PPG acquired Jan. 2, 2008, had 2007 sales of $2.9 billion. PPG shares are traded on the New York Stock Exchange (symbol: PPG). For more information, visit www.ppg.com.

Desoprime and Desothane are trademarks of PRC-DeSoto International.

 

–080408Thunderbirds–

 

Contact:
Audrey Fujimoto
PPG Aerospace
818-549-7597
audrey.fujimoto@ppg.com

Jean Verlich
JV Communications
575-762-2017
jverlich@jvcommunications.com
Search