All Documents

Search results are pre-filtered based on your selected website language. Uncheck the filter to see results in all languages.
1 active filter(s)

Results (183)

PR-1776M Class B Low Weight Fuel Tank Sealant
PR-1776 M Class B sealant is a low density, high temperature aircraft fuel tank sealant with a service temperature range from -65°F (-54°C) to 250°F (121°C), with very limited excursions up to 360°F (182°C). This two-part, manganese dioxide cured PERMAPOL® P-5 polysulfide compound is a low sag paste applied by extrusion gun or spatula and cures at room temperature.
Document Type:Data Sheet Product:PR-1776M Class B Low Weight Fuel Tank Sealant
Desofill HS CA8620G

PPG Desofill HS CA8620G is a chromate-free*, chemically cured, chemical and solvent resistant polyurethane sanding surfacer. CA8620G is designed to fill in the irregularities and surface defects commonly experienced on aluminum, fiber glass, and composite surfaces.

Document Type:Data Sheet Product:Desofill™ HS CA8620G
CV117 Hydraulic Fluid Resistant PU Lacquer

PPG CV117 is a two pack, ambient curing blue tinted, polyurethane lacquer. CV117 has a blue tint which provides improved visibility in use.

Document Type:Data Sheet Product:CV117 Hydraulic Fluid Resistant PU Lacquer
Desothane HD CA9000/B900 Buffable Clear Coat
Desothane HD CA9000/B900 clearcoat is a high solids, buffable, polyurethane clearcoat with exceptional application and performance properties. It is designed to be used with CA9000 basecoat as part of the Desothane HD basecoat/clearcoat system (BCCC).
Document Type:Data Sheet Product:Desothane® HD CA9000/B900 Buffable Clear Coat
Celoflex 95 Erosion Resistant Polyurethane Topcoat

PPG Celoflex 95 is a polyurethane topcoat designed to provide erosion resistance on radomes and leading edges. PPG Celoflex 95 is intended for use on non-metallic / metallic parts and areas exposed to rain erosion.

Document Type:Data Sheet Product:Celoflex™ 95 Erosion Resistant Polyurethane Topcoat
IS-213 Polyurethane Reducer

PPG Deft IS-213 Polyurethane Reducer, qualified to MIL-T-81772 Type I, can be used to improve spray characteristics and film appearance of polyurethane topcoats. PPG Deft IS-213 is compatible with polyurethane topcoats qualified to MIL-PRF-85285 and other similar material specifications.

Document Type:Data Sheet Product:IS-213 Polyurethane Reducer
CA1805CX VOC Compliant Thinner

PPG Deft IS-213 Polyurethane Reducer, qualified to MIL-T-81772 Type I, can be used to improve spray characteristics and film appearance of polyurethane topcoats. PPG Deft IS-213 is compatible with polyurethane topcoats qualified to MIL-PRF-85285 and other similar material specifications.

Document Type:Data Sheet Product:CA1805CX VOC Compliant Thinner
CA1800CX VOC Compliant Thinner

PPG DeSoto CA1800CX thinner can be used with PPG DESOPRIME® HS primers and PPG DESOTHANE® HS topcoats to improve spray characteristics and film appearance. CA1800CX can used in hot weather conditions (above 85°F/29°C) to increase the wet edge of the coating.

Document Type:Data Sheet Product:CA1800CX VOC Compliant Thinner
Desoclean 45 Solvent Cleaner (020X413)

PPG Desoclean 45 cleaner is a broad spectrum solvent cleaner that removes a wide range of contaminants without leaving a residue.

Document Type:Data Sheet Product:Desoclean™ 45 Solvent Cleaner (020X413)
Desobond CA100 A/B Adhesion Promoter

PPG Desobond CA100 is a two component, low density adhesion promoter. It was developed to improve bonding characteristics to aged primers, topcoats, aluminum, and other aerospace alloys.

Document Type:Data Sheet Product:Desobond™ CA100 A/B Adhesion Promoter
Showing 1 to 10 of 183 entries